12 results for free noise gate plugins
iamlamprey Muzzle Transient Noise Gate (VST3, AU)
Muzzle by iamlamprey is a fast, transparent noise gate plugin designed specifically for high-gain electric guitar and percussive tracking. Featuring adjustable threshold, attack, hold, and release parameters, it clamps down on hiss and unplayed noise without clipping transients. The clean interface allows rapid setup for studio tracking and live performance. Transient-preserving noise suppression algorithm optimized for high-gain instruments Adjustable threshold, attack, hold, and release timing controls Real-time gain reduction metering showing active gating behavior Low CPU overhead suitable for tracking and multi-channel processing chains Compatible with 64-bit Windows and macOS systems, available in VST3, AU, and standalone formats.
ToneLib TL NoiseReducer Noise Gate (VST, AU, Standalone)
TL NoiseReducer is a two-unit rack noise reduction and gate plugin developed by ToneLib. Designed to eliminate unwanted noise, hiss, and hum from guitar signals and audio tracks, it provides intuitive sensitivity controls and dedicated guitar frequency filtering. Two-unit noise reduction rack architecture with Reducer and EasyGate units Automated operation mode and dedicated guitar frequency filtering Real-time frequency spectrum visualizer for precise threshold monitoring Compatible with Windows, macOS, and Linux in Standalone, VST, VST3, and AU formats.
igorski.nl Darvaza Tempo-Synced Gate (VST, AU)
Darvaza is a multichannel tempo-synchronized gate plugin designed for creative rhythm gating and sound design. When the gate closes on incoming audio, it processes and spatters back corrupted variations of the source signal using time-synced oscillators. Tempo-synced gate oscillators with selectable waveforms (sine, triangle, sawtooth, square) Independent channel gate timing from 4 measures to 16th notes Sample rate reduction down to 2 kHz and bit corruption effects Integrated reverb with freeze and reverse playback controls Compatible with Windows 7+ (VST2, VST3) and macOS (VST2, VST3, AU).
Six Walls The ThirtySix VCA Compressor (VST3, AU, AAX)
The ThirtySix by Six Walls is a dual-channel VCA compressor, peak limiter, and expander/gate plugin modeled directly on the circuit behavior of the classic Alesis 3630 rack unit. Developed from extensive hardware bench measurements, it reproduces the aggressive clamping, characteristic pump, and analog non-linearities of the vintage hardware. Dual-channel VCA dynamic compression with hard-knee and soft-knee curves Integrated downward expander and noise gate with adjustable threshold and rate Fast peak limiting stage modeled on analog hardware transient clamping behavior Accurate emulation of vintage gain-reduction artifacts and sidechain dynamics Compatible with 64-bit Windows and macOS systems (Apple Silicon and Intel), available as a VST3, AU, and AAX plugin.
Six Walls The Overhead(s) Bleed Suppressor (VST3, AU, AAX)
The Overhead(s) by Six Walls is a specialized drum bleed suppression plugin designed to isolate cymbals from kick, snare, and tom leakage in drum overhead tracks. Rather than relying on static filtering curves, the algorithm dynamically identifies close-mic transient bursts to attenuate shell bleed transparently. Dynamic bleed reduction targeting low-frequency and midrange acoustic drum shell spill Transient-aware processing preserving natural cymbal shimmer and room decay characteristics Adjustable sensitivity and reduction controls for fine-tuning separation levels Low-latency signal path suitable for tracking monitoring and mixing sessions Compatible with 64-bit Windows and macOS systems (Apple Silicon and Intel), available as a VST3, AU, and AAX plugin.
Hypercyclic by Mucoder (VST, AU, Standalone)
Hypercyclic is a free LFO-driven MIDI arpeggiator, gate effect, and step sequencer designed for mangling sustained MIDI input chords. The plugin excels at creating pleasant randomness and syncopation while maintaining alignment with bar and beat boundaries. Key Features: Two tempo-synced LFOs for modulating parameters and creating rhythmic effects Unique sequencer step size modulation for glitchy stuttering effects Groove function for off-beat playing with LFO modulation capabilities Built-in simple synth for testing purposes Outputs MIDI to drive other instruments Compatibility:Available as VST, Audio Unit plugin, or standalone application for Windows, Mac, and Linux. Supports MacOS BigSur and Monterey.
Caesura Effects Craquelure Multi-Voice Fuzz (VST3, AU)
Craquelure by Caesura Effects is a versatile fuzz plugin featuring three switchable diode clipping stages and integrated sub-octave generation. With dedicated controls for frequency tilting, low-mid body resonance, and output gating, it covers subtle harmonic saturation through aggressive, fractured fuzz textures. Three selectable diode clipping circuits including Silicon, Open, and Germanium voices Integrated Ghost circuit blending a rectified sub-octave beneath the primary signal Multi-mode noise gate with soft and tight decay profiles for sputtered decay tails Oversampled processing architecture minimizing digital aliasing across high-gain settings Compatible with 64-bit macOS systems (Universal binary for Apple Silicon and Intel), available as a VST3 and AU plugin.
iamlamprey Altar High-Gain Guitar Amp Simulator (VST3, AU)
Altar by iamlamprey is a high-gain guitar amplifier simulation plugin and standalone application designed for heavy rock and metal production. It features comprehensive pre-amp gain shaping, built-in noise gating, impulse response cabinet simulation, and presence voicing for heavy rhythm and lead tones. The architecture delivers tight low-end response, articulate picking attack, and saturated sustain. High-gain guitar amplifier modeling engineered for modern rhythm and lead tones Integrated impulse response loader with included custom speaker cabinet profiles Pre-amp input stage featuring fast noise gate to silence unwanted pickup hum Three-band equalizer with presence control for focused frequency sculpting Compatible with 64-bit Windows and macOS systems, available in VST3, AU, and standalone formats.
Amped Stevie T Free by ML Sound Lab (VST3/AU/AAX)
Free amp simulator plugin featuring the "Djent God" amp, developed by ML Sound Lab in collaboration with Steve "Stevie T" Terreberry. Perfect for modern high-gain guitar tones. Key Features: One custom "Djent God" amp simulation Four cabinet options: ML Mega Djent, ML Mega OS, ML Mars PR-M75, ML Bgnr Uber Built-in pedalboard with Noise Gate, Drive, Delay, and Reverb IR loader for custom cabinet impulses Option to bypass cabinet simulation for external IR loaders Compatibility: Windows/Mac | Standalone/VST3/AU/AAX (Mac)
Boogex by Voxengo (VST/AU/AAX) - Free Guitar Amp Plugin
Boogex is a free guitar amplifier plugin that delivers rock-oriented sounds from heavy distortion to jazzy saturation. It combines amp modeling with speaker cabinet simulation using built-in impulse responses or custom IRs. Key features include: Zero-latency processing for real-time guitar performance Built-in input gate and reverb modules Emphasis EQ for high-frequency control Stereo convolution processing capabilities Multiple color variants for the interface The plugin works well for rock music but may produce some noise at higher overdrive settings. Compatible with 64-bit Mac and Windows hosts including Ableton Live, Cubase, Logic Pro, REAPER, Pro Tools, FL Studio, and others.









